Professor Robert J. Lopez is a Maple Fellow and the author of many Maple webinars and applications. He is also co-author of a book entitled Discovering Calculus With Maple, which I have recently acquired, and which turns out to be keyed to Maple V Release 3 on a Mac. Well, I have Maple 2020 on a Mac. What is the best way to get this book to work for me?  Thanks very much.

Hello, 
I have this problem to my system:

sol := pdsolve(sys2, {bcs, ics}, numeric)
sol:-plot3d(u1(x, t), x = 2 .. 3.2, t = 100 .. 1000)
Error, (in pdsolve/numeric/plot3d) unable to compute solution for t>HFloat(0.0):
unable to store HFloat(undefined)+HFloat(undefined)*I when datatype=float[8]

It is 1 pde and 1 ode.

What can I do to solve it?

Best
 

Is it possible to develop a code for base excitation problem where excitation data is of earthquake acceleration?

p.s. There are 12000 data available in EQ file.

Hello Everyone,

I am currently trying to tidy up my worksheet and hide all of the script/code that I wrote in the Maple 2D-Math within the execution script of buttons etc.
Was going well so far until I started transferring code where I was using a lot of symbolic math (if I understood correctly)
There is one instance where I have a variable chi which equals x divided by a.
a being a number, e.g. 5000, while x is and remains a variable.
No problem in 2D-Math as the unknown x is dragged through all following equations.

Not so in the code editor, I think. Doing the calculation results not in x/5000, but in this:


It keeps getting worse because this term will be derived, assembled into a matrix, etc. where the expressions are getting ridiculous:


Without getting into the details of what my script should do, I believe this is a very general issue, not specific to my code.

Is the code editor / "Code when Used/Clicked" not capable of symbolic math? Oder is there some setting that could potentially help me?

Best Regards,
Lennart
 

Hi,

I try to build a trigonometric circle with particular values Pi/6,Pi/4,Pi/3, but I find that the coordplot command with its options do not react .

Ideas ? Thanks

CercletrigonométriqueMaple.mw

Hi,

I can’t block the display of my p and A variables even if I finish my commands with both points.

Ideas? ThanksTrianglesQuelconques.mw

Hi all,

There is issue with modp1(('Embed')(...)) function.

Please look at the file:

bug_embed.mw

As you can see in lines 1, 3, 5 Embed function in combining with Constant cutting several digits from argument.

Thank you.

second has rsolve solution

compare original sequence

accsum(ListTools[Reverse]([seq(patterngroup[k], k=(mm)..(mm+lengthofsequence))])),

with rsolve solution , it start from third number wrong, some number are wrong but correct at next number, 

but i just want to guess next number is 1 or 2

[seq(subs(k=kk, sol), kk=0..(lengthofsequence+1))],

with(SumTools):
with(gfun):
accsum := proc(xx)
local result,mm:
result := []:
for mm from 1 to nops(xx) do
temp := Summation(xx[k], k = 1 .. mm):
result := [op(result), temp]:
od:
return result:
end proc:

patterngroup := [2, 1, 1, 1, 2, 2, 1, 1, 2, 2, 2, 1]: # left is latest, 2,1,1..
lengthofsequence := 5:
for mm from 1 to 12 do
if guessgf(accsum(Reverse([seq(patterngroup[k], k=(mm)..(mm+lengthofsequence))])), x) = FAIL then
print(patterngroup[mm]):
else
sol := rsolve(listtorec(accsum(ListTools[Reverse]([seq(patterngroup[k], k=(mm)..(mm+lengthofsequence))])), u(n))[1], u(k)):
acxxc := accsum(ListTools[Reverse]([seq(patterngroup[k], k=(mm)..(mm+lengthofsequence))])):
olist := [seq(patterngroup[k], k=(mm)..(mm+5))]:
#start from 0
print(patterngroup[mm], olist, accsum(ListTools[Reverse]([seq(patterngroup[k], k=(mm)..(mm+lengthofsequence))])), [seq(subs(k=kk, sol), kk=0..(lengthofsequence+1))], sol, subs(k=(lengthofsequence+1), sol), subs(k=(lengthofsequence+1), sol)-acxxc[nops(acxxc)]):
end if:
od:
 

Hello all

I wanna solve an optimal control problem and I have searched the Internet but I could not find any tutorial or video course on how to solve it with the Pontryagin maximum principle method. It is my first time that I want to use MAPLE for solving an optimal control problem and I would be thankful if someone can help me.

$$\max \int_{0}^{1} x_{2} [u(t)-u(t)^2] dt        $$

$$  \dot{x}_{0} = -(1-u(t)) x_{0}(t)+2 x_{1}(t) $$

$$  \dot{x}_{1}(t) = (1-u_{t}) x_{0}(t) +2 x_{2}(t) -[3-u(t)]x_{1}(t)  $$

$$   \dot{x}_{2}(t) = (1-u(t))x_{1}(t) -2 x_{2}(t)   $$

$$  0 \le u_{t}  \le \frac{1+t^2}{1+t}  $$

Thanks

Given a lagrangian  in general relativity , how can I calculate equation of motion using euler lagrangian equation in maple software ?

the lagrangian is 

L = 1/2 g[mu,nu] diff(x[~mu], lambda) diff(x[~nu],lambda)

here lambda is the affine parameter.  and the metric is 

metric coordinate = (t,u,x,y)

How I can find the coefficient an, and bn according to the following solution?

the coefficients an and bn can be found by solving the
two linear equations that come from V = V[0] at eta=eta[0] and 
V = V[1] at eta=eta[1], and comparing with following Eq in each
case.

Best

2.mw

I an unable to prot the optimal  control function and the controls individualy for the diterministic mathematical model with an two or more optimal control. May  any one can give me a sample program on it. Such us the following figure

You may give me direction even.

Hi there.

It seems like a bug in modp1(('Rem')(...)) with large polynomials with large coefficients.

Please look at the file:

bug_rem.mw

It needs the file polys.m there:

https://dropmefiles.com/9fATR

File polys.m too big for this forum so I used dropmefiles.

Polys.m contain two polynomials x and f_t with large degrees: degree(f_t) = m = 50021, degree(x) = 2*m - 2 = 100040 and large coefficients up to 2^N, where N = ceil(m / 2)+2 = 25013.

I just compute rem(x,f_t) mod 2^N.

As you can see in the first part of doc bug_rem.mw I decreased coefficients of polynomials by additional mod 2^N (with Embed function), where N = floor(N / 2) = 12506. WIth these decreased polynomials and decreased N modp1(('Rem')(...)) function works well and use maximum about 2.5 Gb of RAM.

But in the second part of doc bug_rem.mw with original polynomials and N = 25013 modp1(('Rem')(...)) use maximum about 3.5 Gb of RAM and crash with error:

Error, Maple was unable to allocate enough memory to complete this computation.  Please see ?alloc
 

This is strange and looks like a bug considering that the test server has 48 Gb of RAM.

Is it a bug or modp1(('Rem')(...)) just need more than 48 Gb of RAM?

How many RAM it needs for this computation?

Thank you

Hello, I am trying to fix the problem reported below.

I am using the 64 bit version of Maple 2020.1. I am experiencing similar problems with other java applications. So I believe it must be something related to Java.

Moreover, it looks like the local refreshing problem is following the cursor of the mouse, therefore it must be something related to the interaction of the mouse with the GUI.

I am using a I7 CPU, 32 GB of Ram and a Nvidia Geforce RTX 2070.

Is anyone experiencing something like this? How can I fix this?