I have two Reissner Nordstrom black holes that are near extreme. How do I show they move? 

When i copy expression and past it in word, i can change the size of the picture whitout loosing the detials.

How can i export the expression to a file, such that when i will open it in word i could change the size without loosing details? much thnks :)

Dear Maple users,

My problem is as follows:

I have a factor base [2,3,5,7,11,33,34,35,36,37,38,39,40]

The numbers from 2 till 11 are primes, the rest is not. 

Then I have to factor (H+c1)(H+c2) in numbers of the factor base , where c1 and c2 go from 1 to some pre-defined limit. H=32 in my case.
And then I have to put the powers of the numbers of the factor base in a matrix. For example: (H+1)(H+1)=33² but also (H+1)(H+1)=3²*11².

That will become in matrix form [0 , 2, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0, 0 ] but also (!) [0 , 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 ].

This is not what I want! I want no double representations....

What I want is that (H+c1)(H+c2) should be represented in primes in the matrix if possible and else just represented as the other numbers.

hope you guys can help me!

st6.mw,st7.mwI want to obtain the analytical solution for this PDE by maple       . But I can not do it. Please help me

((d^2)T/dx^2)+ ((d^2)T/dy^2)+ ((d^2)T/dz^2)=-A*Q(x,y,z)

Where   0 <x<a ,  0 <y<b  ,  0 <z<l

With the boundary conditions:

(dT(0,y,z)/dx)=n-T(0,y,z)    (dT(a,y,z)/dx)=n-T(a,y,z)   (dT(x,0,z)/dy)=n-T(x,0,z)

(dT(x,b,z)/dy)=n-T(x,b,z)     (dT(x,y,0)/dz)=n-T(x,y,0)    (dT(x,y,l)/dz)=n-T(x,y,l)

where n is constant and A is set of parameters.

Hi,

I have two all 1.-1  square matrices and want to test whether they are equivalent or not. Can anyone help me with details?Thanks in advance

Hello everybody

I am working on the bending of FGM plate, and I just used maple for the calculation functions of my problem of the bending of FGM plates.

Can any from the members of mapleprimes one help me to write Navier's equation include below for the bending of the plate because I am new in using Maple 18

alfa=m*pi/a, beta=n*pi/b with m=1,3,5..100 and n=1,3,5...100

Thank's for all 

Dear Friends,

My present problem is to calculate the coefficients  

of ODES based on the experiment data. In order to simulate the actual experiment, a set of  is given with . Then the experiment data (yexp) can be calculated. Finally, the least-squares method (lsq) is used to calculate the coefficient values. Now the NLPSolve function can be used. However, the globalsolve can’t run.

If it is convenient for you, wish you can solve it.

Code:

restart;
cdm_ode := diff(y1(t), t) = c0*(y6(t)*(1-y3(t))/(s0*(1-y4(t)*(1-y5(t)))))^n/(1-y2(t)), diff(y2(t), t) = ks*y2(t)^(1/3)*(1-y2(t)), diff(y3(t), t) = h1*(1-y3(t)/h2)*c0*(y6(t)*(1-y3(t))/(s0*(1-y4(t)*(1-y5(t)))))^n/(sigma*(1-y2(t))), diff(y4(t), t) = (1/3)*kp*(1-y4(t))^4, diff(y5(t), t) = A*B*y1(t)^(B-1)*c0*(y6(t)*(1-y3(t))/(s0*(1-y4(t)*(1-y5(t)))))^n/(1-y2(t)), diff(y6(t), t) = y6(t)*c0*(y6(t)*(1-y3(t))/(s0*(1-y4(t)*(1-y5(t)))))^n/(1-y2(t));

tol_t := 3600;
sol := dsolve([cdm_ode, y1(0) = 0, y2(0) = 0, y3(0) = 0, y4(0) = 0, y5(0) = 0, y6(0) = 175], numeric, range = 0 .. tol_t, output = listprocedure, parameters = [c0, n, sigma, s0, ks, h1, h2, kp, A, B]);

sol(parameters = [5.7*10^(-6), 10.186, 175, 200, 5*10^(-8), 10000, .269, 1.5*10^(-7), 1.5, 2]);

t := [seq(i^2, i = 0 .. 50, 1)];

y1data := subs(sol, y1(t));
 
y1exp := [seq(y1data(t[i]), i = 1 .. 51)];

err := proc (c0, n, s0, ks, h1, h2, kp, A, B) local y1cal, y1val, lsq; sol(parameters = [c0, n, 175, s0, ks, h1, h2, kp, A, B]); y1cal := subs(sol, y1(t)); y1val := [seq(y1cal(t[i]), i = 1 .. 51)]; lsq := add((y1val[i]-y1exp[i])^2, i = 1 .. 51); lsq end proc;

with(Optimization);
val := NLPSolve(err, 10^(-8) .. 10^(-4), 2 .. 20, 150 .. 250, 10^(-2) .. 1, 100 .. 20000, 10^(-5) .. .4, 10^(-5) .. 1, .5 .. 2, 1 .. 10);
GlobalSolve(err, 10^(-10) .. 10^(-4), 2 .. 20, 150 .. 250, 0 .. 1, 100 .. 15000, 0 .. .5, 0 .. 1, .5 .. 2, 1 .. 5);

Error, (in GlobalOptimization:-GlobalSolve) `InertForms` does not evaluate to a module

I have a fairly old laptop, a Toshiba S10 Tecra, windows 7 64 bit and 4 Gb RAM.  It has an NVidia Quadro NVS 150m video card inside and according to NVidia CUDA capable of a compute level to 1.1 which is ok for float[4] but not float[8].  Inititiating the computecabability in maple does indeed bring a score level of 1.1.

Doing any LinearAlgebra matrix calculations with CUDA enabled is maybe 5x's slower than with it disabled.  I run into BLAS errors and screen blankouts at matrix values of 2000.  The video driver is the latest from Toshiba (2010) but not NVidia (2014) I suppose there would be an increased performace with newer drivers but if I'm going to run into the same issue of slower calculations with CUDA enabled there's no point in even testing the newer drivers on an otherwise fine running machine. 

Since it is a low end video card is CUDA even worthwhile, will I even notice a speed up with updated drivers?

Dear Maple Experts,

i am new to maple and I am trying to write a maple algorithm in order to calculate the GCD of two functions. 

I have defined the two functions and written the algorithm, but I get an error "Unable to Parse".

Here is my code:

restart; with(Algebraic); with(LinearAlgebra[Generic]); with(RegularChains); with(FastArithmeticTools); with(ChainTools); interface(rtablesize = 15);

f := (y^2-1)*((y+1)*x^4+(y^2-1)*x^3+(y^3-1)*x^2+(y^4-1)*x+y^5-1);

g := (y-1)*x^5+(y^2-1)*x^4+(y^3-1)*x^3+(y^4-1)*x^2+(y^5-1)*x+y^6-1;

SubRes:=proc(f,g,var): local  i,a, delta, beta, psi: if degree(f,var)<degree(g,var) then a[0]:=Algebraic:-PrimitivePart(g,var): a[1]:=Algebraic:-PrimitivePart(f,var): else a[0]=Algebraic:-PrimitivePart(f,var): a[1]:=Algebraic:-PrimitivePart(g,var): fi: delta[0]:=degree(a[0],var)-degree(a[1],var): beta[2]:=(-1)^((delta[0]+1)): psi[2]:=-1: i:=1: while a[i]<>0 do a[i+1]:=(prem(a[i-1], a[i], var))/(beta[i+1]): delta[i]:=degree(a[i],var)-degree(a[i+1], var): i:=i+1: psi[i+1]:=((-lcoeff(a[i-1],var))^((delta[i-2])))*((psi[i])^((1-delta[i-2]))): beta[i+1]:=-lcoeff(a[i-1],var)*(psi[i+1])^((delta[i-1])): od: print("Last Non-Zero Subresultant: ", sort(simplify(a[i-1])),y): return (Algebraic:-PrimitivePart(a[i-1],var)): end proc

and I get this error:

Error, unable to parse

Would you kindly help me to fix this issue?

Kind Regards,

Ash

Please I need someone to help out with how to solve the below ODE numerically using finite difference method with the necessary maple code:

█( S〗_h〗^' (t)=Λ_h-αβ_m I_v S_h-μ_h S_h+πI_m,  

〖I_m〗^' (t)=αβ_m I_v S_h-(σ_m+π+μ_h ) I_m

〖 S〗_v〗^' (t)=Λ_v-αβ_v I_m S_v-μ_v S_v

〖I_v〗^' (t)=αβ_v I_m S_v-μ_v I_v )

The initial conditions can be assumed. Suppose i want to include controls, how do I solve the problem and equally plot the graph.

Thank you.

ADENIYI MICHAEL