I want to obtain a report in a particular table format in TextArea component.REPORT (TextArea)area and ComboBox are not visble here.

Can any one help me? TextBox_Format_Output_Request.mw
 

Download TextBox_Format_Output_Request.mw

I attach the doc for clarity of my odoubt. I have made all the required compoennets commands except for the formatting of printf formaat. Thanks for help.

Ramakrishnan V

Hi

trying to make table of points of the pair(lambda1,lambda2) to get the approximate function this technique  is called interpolation

contourplot(4*lambda2*result^2/(Pi*(lambda2+1)^2)-lambda1,lambda1=0..1,lambda2=0..1,contours=[0],axes=boxed,title=tit,titlefont=[SYMBOL,16],thickness=1,color=black,font=[1,1,18],tickmarks=[2, 4],linestyle=1,view=[0.002..1,0.002..1]);

any one knows how to find it

Hello everyone,

I need your helps .I have this code to solve equation numerically with random coefficients, but sometimes the solution find a singularity, for that I create conditional if to avoid it , but its does not work.

Thank you a lot.

Download g.mw

Hi all,

I am hoping to use Maple to develop a list of 4 distinct linear factors with the following conditions...

1)  each individual factor does not have a common integer factor...  ie...  3x+9 is not permitted

2)  the coefficients in each individual factor has an integer between (-9 and 9) without the possibility of zero...  ie x + 0 and 0*x +3 are not permitted

3) each seperate factor is prime to one-another.  ie.  factor1=3x+4  and factor2=-3x-4 is not permitted.

I was hoping to use something short and sweet, using a sequence (if possible), but continue to run into problems.

Any help out there would be fantastic

Thanks,

Mark

Would someone be able to explain this strange output?

restart;
sol:=int(1/(x*sin(x)),x);
algsubs(x=t,sol);

How did Maple manage to obtain this? I tried tracing but it did not help me figure it out.  If it is of any help:

int(1/sin(x),x);

It seems algsubs got confused somewhere?

Maple 2017.2, windows.

I am learning how to use Threads. I looked for an example code in Start / Programming / Example: Task Model and Multithreaded Programming. I found a MandelBrot code, which I was able to change a value in the If -then statement to run in Threads or no Threads mode. I added a time() function to get a sense of the execution time. The results are about 140s with Threads and 91s with no Threads. I would have thought that the execution time would be smaller in the Threads mode than in the no Threads mode. Did I assume incorrectly that I was creating a Threads and no Threads situations by modifying the if-then statement? Or is this not good example? Here is the code:

Threads_Ex3a.mw

with(PDEtools); declare(u(x, y, z, t), U(X, Y, Z, T)); interface(showassumed = 0); assume(a > 0, p > 0); W := diff_table(u(x, y, z, t)); E := 6*W[]*W[x]+W[t]+W[x, y, z] = 0; InvE := proc (PDE) local Eq1, Eq2, Eq3, Eq4, tr1, tr2, tr3, tr4, term1, term2, term3, term4, sys1; tr1 := {t = T/a^beta, x = X/a^alpha, y = Y/a^mu, z = Z/a^nu, u(x, y, z, t) = U(X, Y, Z, T)/a^zeta}; tr2 := eval(tr1, zeta = 1); Eq1 := combine(dchange(tr2, PDE, [X, Y, Z, T, U])); Eq2 := map(lhs, PDE = Eq1); term1 := select(has, select(has, select(has, rhs(Eq2), a), beta), a); term2 := expand(rhs(Eq2)/term1); term3 := select(has, select(has, term2, a), a); sys1 := {select(has, op(1, term3), a) = 1, select(has, op(2, term3), a) = 1}; tr3 := solve(sys1, {alpha, beta, mu, nu}); tr4 := subs(tr3, tr2); print(tr3, tr4); Eq3 := dchange(tr4, PDE, [X, Y, Z, T, U]); term4 := select(has, op(1, lhs(Eq3)), a); Eq4 := expand(Eq3/term4); PDE = simplify(Eq4) end proc; InvE(E)

> restart;
> u := c-6*mu*(1+lambda*sqrt(-mu)*coth(A+sqrt(-mu)*(x+y+mu*t)))/((a+b)*sqrt(-mu)*coth(A+sqrt(-mu)*(x+y+mu*t)))+6*mu*sqrt(sigma*(1-coth(A+sqrt(-mu)*(x+y+mu*t))^2))/(sqrt(sigma)*(a+b)*sqrt(-mu)*coth(A+sqrt(-mu)*(x+y+mu*t)));
            /                (1/2)     /         (1/2)               \\
       6 mu \1 + lambda (-mu)      coth\A + (-mu)      (x + y + mu t)//
   c - ----------------------------------------------------------------
                         (1/2)     /         (1/2)               \     
            (a + b) (-mu)      coth\A + (-mu)      (x + y + mu t)/     

                                                                 (1/2)   
               /      /                                       2\\        
               |      |        /         (1/2)               \ ||        
          6 mu \sigma \1 - coth\A + (-mu)      (x + y + mu t)/ //        
      + -----------------------------------------------------------------
             (1/2)              (1/2)     /         (1/2)               \
        sigma      (a + b) (-mu)      coth\A + (-mu)      (x + y + mu t)/
> c := 1;
                                      1
> mu := -1.5;
                                     1.5
> lambda := 1.5;
                                     1.5
> a := 1;
                                      1
> b := 1;
                                      1
> A := .5;
                                     0.5
> y := 0;
                                      0
> plot3d([abs(u)], x = -10 .. 3, t = -10 .. 3);
Warning, unable to evaluate the function to numeric values in the region; see the plotting command's help page to ensure the calling sequence is correct

> restart;
> u := a[0]-12*sqrt(mu)*(1+lambda*sqrt(mu)*tan(A-sqrt(mu)*(x+y+4*mu*t)))/((a+b)*tan(A-sqrt(mu)*(x+y+4*mu*t)));
              (1/2) /             (1/2)    /      (1/2)                 \\
         12 mu      \1 + lambda mu      tan\A - mu      (x + y + 4 mu t)//
  a[0] - -----------------------------------------------------------------
                                /      (1/2)                 \            
                     (a + b) tan\A - mu      (x + y + 4 mu t)/            
> a[0] := 2;
                                      2
> mu := 1.5;
                                     1.5
> lambda := 2;
                                      2
> a := .5;
                                     0.5
> b := .5;
                                     0.5
> A := 1.5;
                                     1.5
> y := 0;
                                      0
> plot3d([abs(u)], x = -3 .. 3, t = -3 .. 3);
Warning, unable to evaluate the function to numeric values in the region; see the plotting command's help page to ensure the calling sequence is correct

i have a problem with readstat, when using proc , the readstat command returns some errors and do not complete the reading procedure, but without using proc, it is ok, what should i do ? is this a bug?
 

Download read.mw

Hi. I would like to learn to use your package. The example  document for it not running (for me). Included a screen shot and my test document. Basicially It would like to import .mpl procedures and use them as the exports of a module/package. I have no experience with code editors and this is the first time I have tried to use the code edit region. Also whathat does the (**) mean/do?

Edit: I redid the documet.

Download 1-CodeBuilder_Pkg_test.mw

@Joe Riel 

Hello,

I am plotting a three dimensional plot within a range in maple. There are two variables x and y. Third dimension is the objective function ( Z).

On this three dimensional plot, I want to show the point ( preferably by some colour, say red) which have maximum objective value. How it can be done in maple?

Also, Can I show the maximum objective function value (Z) and its coordinates (x,y) on the graph.

Thanks and regard,

Nilesh

I want ot add an annotation to a plot using the drawing facility. Then I export the plot. My problem is that I cannot increase the viewport of the plot without also increasing the size of the plot. For example the code:

produces this plot:

I have constrained the plot and used the size option which together have the side effect of giving me more horizontal space. But this is a wretched hack! I want to size the viewport of the plot so I can write on it.

For sqrt(-1), Maple returns I. Why not -I? I understand why in general Maple does not, and should not, return both signs, because sqrt is defined with a branch cut - specifically out along the negative real axis:

FunctionAdvisor(branch_cuts,sqrt(s));

But as +I and -I lie symmetrically around the branch cut, I do not understand why +I should be chosen in favor of -I. Neither the square of +I or of -I crosses the branch cut, which is,  I guess, the standard way to select a unique value, although both squares end up on the branch cut itself - the latter fact leading to the following more general consideration:

I do not understand why the square root of any negative real number (the above being just a specific case) should at all be assigned any meaning when lying as they do on the branch cut itself. I think it would be more sensible if Maple raised an error, telling you that the branch cut needs to be changed/moved if any value is to be assigned. Which leads me to the following question:

Can the branch cut of the logarithm, and thus of sqrt as well, be changed/moved? I would like it to lie out along the negative imaginary axis.

Update I: Concerning -1 lying on the branch cut itself, there is no issue, see my 'ups' in the reply to the answer by John May. But redefining the branch cut is still relevant.

Update II: Perhaps the issue raised is not all that trivial, after all. At least, it is "a subject of papers and debate", as Alejandro Jakubi formulated it in an email to me, pointing me to the article 'Function evaluation on branch cuts', by Rich and Jeffrey.

I have a symmetric big matrix (1000*1000). Some of its rows and columns are zero. Is there any command in Maple that recognize these rows and columns and then remove them to form new matrix?

What do you recommend?