i don't know much about maple, i need to solve the following odes system... I study a little on the help page of maple about numeric[midrich] that takes bvp and deal singularity as well but dint know how to used in the following system

odes.mw

I use pdsolve to solve this system of equation but the graph I have is different from the author's graph. I think I'm missing out on something. Can anyone help me out with the solution using any Maple command and module.

PDE := {diff(phi(x, t), t) = (diff(phi(x, t), x, x))/S__c-K__r*phi(x, t)+S__r*(diff(theta(x, t), x, x)), diff(u(x, t), t) = diff(u(x, t), x, x)-M^2*(u(x, t)-m*w(x, t))/(m^2+1)-u(x, t)/`ϰ`-2*Omega^2*w(x, t)+Gr*theta(x, t)+Gm*phi(x, t), diff(w(x, t), t) = diff(w(x, t), x, x)+M^2*(m*u(x, t)-w(x, t))/(m^2+1)-w(x, t)/`ϰ`+2*Omega^2*u(x, t), diff(theta(x, t), t) = lambda*(diff(theta(x, t), x, x))/P__r}

With Inittial and boundary condition : {phi(0, t) = 1, phi(9, t) = 0, phi(x, 0) = 0, u(0, t) = t, u(9, t) = 0, u(x, 0) = 0, w(0, t) = 0, w(9, t) = 0, w(x, 0) = 0, theta(0, t) = 1, theta(9, t) = 0, theta(x, 0) = 0}

With the following parameter declared as:

I will appreciate the graph of the solution with time t:0.3, 0.5, 0.7 and 1.0.

Thanks.

When trying to perform the following:

p1 := proc (x, y) if x^2+y^2 <= 1 then x*y-y^2 else 0 end if end proc;
plot3d(p1, x = -1 .. 1, y = -1 .. 1);
Error, (in plot3d) expected ranges but received x = -1 .. 1 and y = -1 .. 1
 

I get this strange error message. To the best of my knowledge x and y ARE provided as ranges. What am I missing/not understanding?

If I omit the ranges in plot3d Maple returns a correct plot, but the default range (-10 .. 10) does not display sufficient details

This is what I'm trying to solve:

I literally just want it to plug in those values for n and spit out a value. This is easy enough for me to do by hand, but I obviously wanted to speed up the process by doing it with Maple. What's wrong here? I clicked the pink links and that didn't help.

I'm going back over QM homeworks to study for an exam. We're allowed to use Maple on our exam so I want to be sure I'm prepared for that part. I have the solution to a problem I'm working on, but I can't get Maple to simplify it how I want it.

Is that simplification something that Maple should be able to do or is it something I would need to know how to do because Maple isn't capable? (I assume it is.)

Thanks!

........................................................................................................................

Hello!

I am trying to solve several equations for some mechanics problem.
I made the following lines with variables: Az, Bz, Dz, Dx, Ma.
The equations are showed in the image below. I can use either Md equation or Mb to solve the problem, but using both is not allowed. I tried to solve the equations with the solve function, but cant find any answer though there should be?

Thank you in advance :)

I'd like to make a graph like the below. So I know that using the display command and putting graphs in matrix form produces something similar (display(<graph1|graph2|graph3>), however it doesn't allow me to export it as one graph. Any ideas?

I'm trying to get Maple to find integer number solutions using isolve. 

For example, the equation eq:=2.5*x+5*y=15
 

isolve(eq)

∅

Perhaps I need to specify a range?

Hello folks, i recently had really confusing times when i plotted the function (x^(5/3)-5*x^(2/3)) in maple 2016. I know how this graph looks like as i have it printed in my undergraduate textbook. But in maple i'm not getting function(above given) values plotted for negative numbers. When i evaluate the function for x=-1 i'm getting some complex numbers, when i'm supposed to have simply -6. Could anybody tell me what's going on?

I'm looking to leanr the sign and to simplify a very long expression , how can i do this ? can anyone help me thank you in a

advance.

I have attached the problem here. I need to say sorry, because I did not provide the whole code. So, automatically It will be error if you execute it.

If you see the attachement, you will see "Result_Eva_GB_X2[3] := []". It makes a problem if I want to make comparison. So I want the result of "Result_Eva_GB_X2[3] := []" is [0].

Actually the result of Result_Eva_GB_X2[3] := [] is complex number, because I did not want the complex I made select(x->is(0<x<1)....) to eliminate the complex number and negative result. So the question is How do I make the result of Result_Eva_GB_X2[3] := [] is [0]?

I have tried to add "Selection Statement (if)" (If the result is Undefined ([]) then Result_Eva_GB_X2[3] := [0]) But it can not work. Or maybe the selection statement that I made was wrong.

Please Help me. Thank You very much

2Ask.mw

How can I find the numeric value of this PDE:

Where

I want the numeric values i.e theta(2,2) , theta (1,3) and the likes.

Is Symbolic Laplace and Inverse Laplace transform possible on Maple? if Yes, how do I find the inverse laplace of this function 

Thanks.

Respected member!
Please help me to find the solution of attached problem, I am a new user so pleaes forgive any mistakes.
 

Download mplprimes.mw