Hi,

Thank you all for participating to my questions before.

I was wondering if we can change an equation into quartic form or quadratic form in maple.

I have succesfully got an equation like the following:

`S__2 ` = sin(alpha - phi)*sin(-beta + alpha)*(gamma*H^2*sin(beta - varepsilon)*sin(alpha) - h^2*sin(beta)*sin(alpha - varepsilon)*gamma + h^2*sin(beta)*sin(alpha - varepsilon)*psi)/(2*sin(-beta - delta - phi + alpha)*sin(beta)^2*sin(alpha - varepsilon)*sin(alpha)) - S__1

From the paper I studied, they change it to form an equation like this

`S__2 ` = 1/2*gamma*H^2*sin(beta - alpha)*(M__3(X)^3 + M__2(X)^2 + M__1*X)/(sin(beta)^2*(D__3(X)^3 + D__2(X)^2 + D__1*X + D__0)) - S__1

Where value of M, D and X is sets of long equation. Can someone teach me how to assign maple to change this kind of equation to another form of equation. It's good enough if I can learn how to learn the basic.

Thank you.

Regards

Faiz Farhan

Dear All,

I want to apply the ‘simplify’ command, in parallel, for the simplification of some parameters. Both Grid:-Map and Grid:-Run commands are tested. There is no error in both, whereas no simplification is implemented. It seems that the ‘simplify’ command correctly works on only ‘Master’ node, namely anywhere we are typing.

Can anyone help me to simplify in parallel. I examined two following codes.

1)

with (Grid);

for i from 1 to nops(dummy_UU1) do

freenode:=WaitForFirst():

Run(freenode,simplify,[dummy_UU1[i]],assignto='dummy_UU2'[i]):

end do:

Wait();

2)

dummy_UU2:=Map[tasksize=1](simplify,[seq(dummy_UU1[i],i=1..nops(dummy_UU1))]):

The following code is correctly executed and resulted in the simplification of dummy_UU1 components in serial.

for i from 1 to nops(dummy_UU1) do

dummy_UU2[i]:=simplify(dummy_UU1[i]):

end do:

Could anyone help me out to convert the equation into differential transform method

Hello Everyone, can anyone explain how to import a mathematical equation from maple to word directly?

Just wonder about the status of the public folder in Maple Cloud.

I've tried to upload a file there, but got the reply that the uploaded file is going to be reviewed first. That was end of july.

Sorting files after date shows that the last upload was done in october 2019. Content unknown as it that was in chinese (probably).

It's not really important to me, as I can always find another site to upload stuff, just wondering.

I want to to solve the system of partial differential equation using maple. I tried it but I am not able to solve it ... please help.

the equations are as follows

Download Finding_transformation_eqn_between_zero_and_harmonic_with_conformal1.mw

Hi,

I am trying to solve a differentiation but I think I am stuck since the solution is not what it should be.

So, I got the equation below

eq4 := `S__2 ` = sin(alpha - phi)*sin(-beta + alpha)*H^2*M/(2*sin(-beta - delta - phi + alpha)*sin(beta)*sin(alpha)) - S__1

And according to the paper I read, to get the maximum value of alpha for maximum value of S_2, I need to make differentiation to first derivative where dS_2/d(alpha) = 0

Then I should substitute back value of alpha to equation above and the paper shows that i should get equation below.

`S__2 ` = 1/2*M*K__a*H^2 - `S__2 `

where K_a is

`K__a`= [(sin(beta+phi))/((sin(beta))/(sqrt(sin(beta+delta))+(sqrt(sin(phi+delta)*(sin(phi-varepsilon)))/(sin(beta-varepsilon))))]

I know its really hard but hope someone can give some idea how to do it.

Thank you very much.

Kind regards

Faiz Farhan

Got a lot of worksheets who are not complete anymore once opened in maple 2020

It can be only opened with a old version of Maple
Can it be imported in Maple 2020?

example 

Dynmod03.mws

Please can you help me in resolving this error?

Here is the codeOptimal_control_model_of_DF_and_LP_2.mw

I am currently working on a project that generates a set of matrices and I want to find their eigenvalues, but using the inbuilt Maple engine takes too long. The problem is that whenever I try to use the Matlab[eig] command I get the error:

Error, (in Matlab:-setvar) unable to store '-3.*Re(X)' when datatype=float[8]
I found out that solving symbolic matrices in MATLAB requires first defining symbols with the "sym" command but I've been unable to do that in Maple.

Hi, 

Could anyone help me to numerically solve this ode?
I've tried almost all the methods Maple proposes, trying to adjust stepsizes, tolerances and so on;, always without success.

I give also the exact solution of this ode in order to compare the numerical solution to.

Thanks in advance
 

Download Unsuccessful_dsolve.mw

I am creating Maple figures that are being used to create camera-ready figures in Adobe Illustrator. The graphic artist doing the Adobe Illustrator has asked me if there is a way to have the text information in the figure (tickmarks, axis labels, ...) saved as text and not created as an image?

I know that other EPS files have text stored this way, but it appears Maple does not do this. I can't find any documentation about this. Does anybody have any knowledge or experience about this?

Thanks in advance,

Doug

.............................................................................

In my worksheet today my intention was to compare the least squares linear regression for three datasets as indicated, but when I right click on the output as seen in the bottom line to select the plot type, all options state there to be independant variables K[0] and K[1], where as the output displays only the variable K as I intended, which part of my code is creating this confusion for maple?

Download ask_maple.mw

I want to do the substitution f(t) - ff(t) = epsilon for any variable t in Maple:

expand(myerror);
    2 f(x - 2 h)   f(x)   3 f(x + 3 h)   2 ff(x - 2 h)   ff(x)
  - ------------ - ---- + ------------ + ------------- + -----
        15 h       6 h        10 h           15 h         6 h

       3 ff(x + 3 h)
     - -------------
           10 h     

NULL;
myfunc := t -> f(t) - ff(t) = epsilon;
 myfunc := proc (t) options operator, arrow, function_assign;

    f(t)-ff(t) = epsilon end proc

algsubs(myfunc(t), myerror);
          2               1        3            
        - -- f(x - 2 h) - - f(x) + -- f(x + 3 h)
          15              6        10           
        ----------------------------------------
                           h                    

               2                1         3             
             - -- ff(x - 2 h) - - ff(x) + -- ff(x + 3 h)
               15               6         10            
           - -------------------------------------------
                                  h                     

NULL;
subs(f(-h*n + x) = 1, ff(-h*n + x) = 0, f(x) = 1, ff(x) = 0, f(h*m + x) = 1, ff(h*m + x) = 0, myerror)*epsilon;
                           4 epsilon
                           ---------
                             15 h