Error_redirect_pa.mw  i got the problem to get repeated value of unknown parameter ''ALPHA"" using pade approximation in maple. i uploted my worksheet kind watch out my problem. and give some suggessions...Error_redirect_pa.mw 

hello ,

I have figured out how to solve for corresponding values but when i try to solve the set of equations by using for example,

a :=[10 values]

b:=[10 values]

w:= [10 values]

##here i want to solve the set of equations for  [a1 b1 w1] ,[a2 b2 w1] , [a3 b3 w1]....like i want to solve the equations for all correponding values of a,b @ each w ##

set of equations (function of a,b,c)

i cant make it work...

I want to mix nicely formatted text and code, with the ability to hide the code and variable scoping

Something like

Some blah blah
{ First part of code snippet with scope 1
More blah blah
Second part of code snippet with scope 1}
Yet more blah blah
{ Second code snippet with scope 2 }

In Mathematica I would use the "Module" keyword, but there does not seem to be an equivalent in Maple, and I am not sufficiently...

I want one of a sequence of questions to not show it answer. The other questions need to show their answers, but this one

cannot. I could make a separate assignment for this question but that seems rather painful. I use latex => .qu so the

solutions that don't require touching the editor is a plus.

Hi;
I need your help:

1- How to improve the implementation of the functions or procedures.? As displayed, is the result of the Matlab function "FromMFile"

2- how to plot the  standard basis vectors in which the cylinder is initially represented.

Having a few problems in working out system transfer functions using the SystemConnect command.

1. I think that there are errors in the description of the function within the HELP file. In the Description there are five bullet points. It is the third bullet point I think has an error. yi maps the global inputs to the global outputs, OK - however the text describes this as 'the number of rows in the yi matrix is determined...

I was successful @ splitting the coupled eq into the 3 constituent PDE's but have been unsuccessful to get MAPLE to generate the characteristic solutions except for the 1st one for X which is the basic solution to the Helmholtz eq.

Can someone with more savy with MAPLE verify whar I have so far & advise me how to proceed to solve for Y & Z?  I have uploaded my file.  My expereince with MAPLE vector calc package is limited.

appreciate the assistance

Hello everybody!

I'm working on a statistical problem. I need to plot confidence regions for parameters in the model, but I don't know what I should do. I tried to get some programs from the internet, but either they don't work or I don't understand details of them to change for my work. Can someone introduce a good program to me?, or does anyone have another useful idea for me?

Thanks a lot!

I am analyzing a system that was at steady state and then subjected to a step change.  I have the steady state modeled with a system of ODEs.

I am going to model the step change with a system of PDE's.  The system will be discretized in space and time (z,t).  I know how to setup one side of the boundary conditions (0,t) for all variables, but the other (i.e A(z,0)) I would like to use the results of the steady analysis. Does anybody have some ideas on...

It's possible for a user to set many defaults within a Maple session. One feature I do not see how to customize is the "point probe" tool. In earlier versions of Maple there was only one mode, and the coordinates of the cursor within a 2D plot were displayed in the context bar of the Maple window.

Now, there are several different modes for viewing coordinates within a plot. By default, the point probe shows nothing about the current location of the cursor. To change the point probe for one plot, right click and select Probe Info from the context menu, then choose one of "Cursor position", "Nearest datum", or "Nearest point on the line".

This has to be repeated for each plot.

Is there a way to set the default?

This works only when the plot "Manipulator" is set to "Point Probe". If it's set to Pan or Scale, this needs to be changed via the icons on the plot toolbar or through the Manipulator entry on the context menu.

Along the same lines, is there a way to set the default Manipulator to Pan or Scale?

Relevant help pages are worksheet,plotinterface,pointprobe and worksheet,plotinterface,manipulatormenu

If not, these would be nice features to have added for Maple 15.

I would like to know if it´s possible to generate a standalone .exe program based on Maplesim models, to be used out of maplesim and integrated with other tools i have.

I can use compilation in maplesim, but this just speed up the simulation, without giving to me a compiled external code.

I´m having to export maplesim modelica model to openmodelica environment, and generate an exe code there. the input and output parameters are transformed into text...

Hello Samir,

Could you explain me what this circuit couldn't be simulated if I replace the default fluid properties to the water's ones? The default fluid is an hydraulic oil, but for water (density = 998 kg/m^3, bulk coefficient = 2.2 10^9 Pa and cinematic viscosity = 10^-6 m^2/s) the simulation gives unsuccessful results. I tried with several solver with similar results.

Moreover, similar behaviours I experimented if I include chamber components into the hydraulic circuits.

Codewords:=proc(L,x,y,z)
local
List:=[];

if L=S then
if x=1 then

print(`A 1 j k`);
else
print(`A 0 j k`);
fi:


if y=1 then

print(`B i 1 k`);
else

print(`B i 0 k`);
fi:
if z=1 then
print(`C i j 1`);
else

print(`C i j 0`);
fi:
fi:
if L=A then
if x=1 then

print(`S 1 j k`);
else

print(`S 0 j k`);
fi:

if y=1 then

print(`C i 1 k`);
else

print(`C i 0 k`);

sendtomap1.mw, sendtomap2.mw, wood_riess.zipHi! I've written a program for my work to obtain "chi square" for a range of data. Can someone tell me why my first example which I have attached and I've called it "sendtomap1" works correctly, but the second one "sendtomap2" has an error?...

Hello!

I'm writting a simple program to obtain chi-squared for my model. I've written it for a costant value of "n" and it correctly works and results chi-squared, but when I want to write a loop for "n" then the program doesn't work at all.

I don't recieve any error message. can you help me?